Heavy-duty, flexible gas connectors for indoor and outdoor appliances used in residential applications.

• 10 Series: 3/8" OD / 1/4" ID - recommended for water heaters, gas logs and space heaters
• 20 Series: 1/2" OD / 3/8" ID - recommended for dryers and water heaters
• 30 Series: 5/8" OD / 1/2" ID - recommended for ranges, furnaces, manufactured homes

Available lengths:
12", 18", 24", 30", 36", 48", 60" and 72"

Tubing: Annealed, 304 stainless steel (ASTM A240)
Flare nuts: Brass
Adapters: Brass or plated steel
Optional Coating: Heavy-duty, antimicrobial hot-dipped gray PVC (for ½" OD and 5/8" OD connectors only)

• CSA design-certified for indoor and outdoor use
• 100% factory leak tested
• 5/8" OD connectors feature special 15/16" - 16 threads required for CSA design-certification

See Spec Sheet for a complete list of fitting combinations

Yellow-coated flexible connectors for quick and easy visual identification of gas line. Durable coating also guards connector aganst accidental contact wth common household chemicals. Coating is applied along the entire length of the connector with no overspray inside of the tube or on the flare which could introduce debris and cause leaks.

Available tube diameters:

• 10 Series: 3/8" OD / 1/4" ID - recommended for water heaters and space heaters
• 20 Series: 1/2" OD / 3/8" ID - recommended for dryers and water heaters
• 30 Series: 5/8" OD / 1/2" ID - recommended for ranges, furnaces, manufactured homes

Available lengths:
12", 18", 24", 30", 36", 48", 60" and 72"

Tubing: Annealed, 304 stainless steel (ASTM A240)
Flare nuts: Brass
Adapters: Brass or plated steel
Coating: High-Performance polymer coating

• CSA design-certified for indoor and outdoor use
• 100% factory leak tested
• 5/8" OD connectors feature special 15/16" - 16 threads required for CSA design-certification

See Spec Sheet for complete list of fitting combinations.

The ULTRAflow™ connector is specifically designed for applications with a significant BTU requirement. Can supply up to 1.5 million BTU (NG) or 2.4 million (LP), depending on length. It increases productivity by eliminating the need for pipe nipples, 90's and elbows. Since it comes pre-assembled, there's no field threading or cutting required. The ULTRAflow is coated with a heavy-duty dipped PVC coating to provide extra protection from abuse or environmental factors.

Available Tube Diameters:
41 Series: 1" OD / 3/4" ID
51 Series: 1-1/4" OD / 1" ID
61 Series: 1-1/2" OD / 1-1/4" ID

Available lengths:
12", 18", 24", 30", 36", 48", 60" and 72"

Tubing: Annealed, 304 stainless steel (ASTM A240)
Flare nuts: Brass
Adapters: Brass or plated steel
Coating: Heavy-duty, antimicrobial hot-dipped gray PVC

• CSA design-certified for indoor and outdoor use
• IAPMO listed
• 100% factory leak tested
  

See Spec Sheet for a complete list of fitting combinations

This 304 stainless steel 15 PSIG connector is a safe and easy alternative to typical copper or polyethylene connectors.  With the fittings attached to the flexible tubing, no cutting or flaring of copper is required, saving time and material.  Connector is 5/8" OD with a heavy-duty gray PVC coating.

• From 1st stage regulator on LP tank to rise
• From riser to 2nd stage regulator at the home
• From LP tank to the home

Tubing: Annealed, 304 stainless steel (ASTM A240)
Flare nuts: 5/8" forged brass SAE 45°
Adapters: 5/8" brass SAE 45°
Coating: Heavy-duty, antimicrobial hot-dipped gray PVC
Maximum Pressure Rating: 15 PSIG
Operating Temperature: -40° F to 150° F

• 100% factory leak tested

Used to connect 2 double-wide portions of a manufactured home.

3 types of kits available:
1. Uncoated stainless steel gas connector with SnapFast™ quick disconnect and polymer dust cap & plug
2. Heavy-duty PVC coated stainless steel gas connector with  SnapFast™ quick disconnect and polymer dust cap & plug
3. Uncoated stainless steel gas connector with a full-port valve and polymer dust cap & plug

Tubing: Annealed, 304 stainless steel (ASTM A240)
Flare nuts: Brass
Adapters: Brass or plated steel
Optional Coating: Heavy-duty, antimicrobial hot-dipped gray PVC

• Compliant with HUD requirement
• CSA design-certified (30/31)
  IAPMO listed (40/41, 50/51 only)
• 100% factory leak tested
• 5/8" OD connectors feature special 15/16" - 16 threads required for CSA design-certification
  
  

Designed for the Do-it-Yourselfer, these kits feature all components needed to install a gas dryer or gas range. Each kit contains leak check and thread sealant to ensure a proper connection, as well as an extra fitting to accommodate alternate installation needs.

Dryer Kit:
1/2" OD x 48" long gas connector, 1/2" MIP x 3/8" FIP
1/2" OD x 3/4" MIP adapter
Leak Check & Thread Sealant
Detailed Instruction guide

Range Kit:
5/8"" OD x 48" long gas connector, 1/2" MIP x 1/2" MIP
5/8" OD x 3/4" MIP adapter
Leak Check & Thread Sealant
Detailed Instruction guide

See Spec Sheet for complete details